Shopping Cart -

$0.00 (0 item)

You have no items in your shopping cart.

Subtotal: $0.00


Weldona, Colorado 970-368-4455

DieselOrings is a small, family owned and operated business located in the sparsely populated plains
of Northeastern Colorado. During these unsure times we will continue to fulfill orders as long as the US Post Office and UPS continue to operate.
Thank you for your business and stay safe.

  3/26/2020 - UPS Suspends Service Guarantee due to the Novel Coronavirus pandemic (LINK)

#8-011 Oil Level Gauge - Oil Pan Repair Kit

More Views

#8-011 Oil Level Gauge - Oil Pan Repair Kit


Availability: In stock

Oil Level Gauge Adapter Repair Kit for 1994 - 2003



Oil Level Gauge Adapter Repair Kit
A full repair kit for the adapter that is located on the passenger's side of the oil pan where the dip stick tube is connected to the oil pan.
This kit will fit all 7.3L Ford diesels from 1994 to 2003 and the engine oil pan does not have to be removed.
Note: If you have tried to tighten up your flange adapter's large 2" nut, this may have bent the interior part of the flange adapter where the new O-ring and seal may not be able to fully contact the interior on the oil pan. If this condition exists, this kit may not repair your leak.
Parts and tools included with the kit:

  1. Loctite 515 Flange sealant 6ml
  2. Galley Brush
  3. Oil level gauge adapter gasket
  4. Viton Oil level gauge adapter interior O-ring
  5. Ford special Dip stick tube O-ring
  6. Oil level flange nut
 WARNING: Do not use the Super Lube O-ring Lube on the Ford DIpstick o-ring, only use motor oil for lubrication on this o-ring.

Revised Oil Level Gauge Adapter Instruction Sheet:

Download PDF file Here.

Here is one customer's YouTube video and review on our kit

Order of 1 is one complete repair kit
Item # 8-011

External Thread Restorer File Tool
When the old internal O-ring begins to swell and pushes itself out of the groove in the adapter, it puts enormous pressures on the adapter’s threads, stretching and distorting them to the point that the new nut is difficult to install. You will need to hold the adapter solidly to clean and straighten the thread. We have found that by using a set of needle nose vise grips inserting into the dipstick tube opening does a good job at this.

If you do not have access to a #16 External Thread Restorer File, we sell a multiple thread pitch file located in the upper right corner of this page or we have them listed in our shop supplies section. It is highly recommended to have one of these tools before attempting the repair to straighten the distorted threads on the internal adapter.


Orders Over $99 with *Free Shipping on US orders ships via US Postal Mail including Hawaii, Alaska and PR. Weight restrictions apply to Hawaii, Alaska and PR
*Free Shipping on large and/or heavy orders ships via UPS and only applies to orders to addresses within the Continental US (excluding Alaska).
UPS shipments outside the Continental US will incur additional charges.