Replacement Compressor Wheel Complete Install Kit

for 1999-2003 GTP38 Turbo

This is the same wheel that came with the early 99 7.3L diesels. It is sold as an aftermarket compressor wheel by many other names and will fit all F-series stock turbos from 1999 to 2003 equipped with the 7.3L engine. This wheel will reduce and/or eliminate turbo surge on the GTP38 turbos caused from aftermarket performance chips and modifications, greatly increasing the life of the stock turbo. It will also improve the turbo spool-up tme but it is not considered a performance upgrade.

Torque Spec (Wheel to shaft): 45-60 LB-IN (inch pounds)

Includes a FREE Turbo Remount kit with compressor housing o-ring (Item #14-009), a $26.45 value!

PLUS FREE SHIPPING!

The Whistlin' Wheel will give your stock GTP38 turbo the unmistakeable big rig turbo whistle. Modifications such as removing the foil from the CAC tube and installing an open element filter such as the AFE or 6637 mod will also enhance this whistle. 

The compressor wheel has been balanced by the manufacturer so it can be installed in your compressor without having to balance the entire shaft assembly.

This is the Genuine Borg-Warner GTP38 Compressor Wheel #170293 not the CHEAP, poorly balanced Chinese knockoff with a very low price you can find on other websites. If it does not say Borg-Warner, it is not the Original OEM wheel.

Made in the USA

 An order of 1 includes:

• 1 - Compressor wheel
• 1 set of #9-003 Turbo Pedestal O-rings - 4 o-rings for upper and lower Pedestal
• 2 - 10.9 grade turbo mounting flange bolts
• 1 - Turbo outlet o-ring
• 1 - EBPV actuator rod clip
• 1 - EBPV piston o-ring
• 2 - EBPV solinoid o-rings
• 1 - compressor housing o-ring
  

item #14-003
*US and US territories only