Shopping Cart -

$0.00 (0 item)

You have no items in your shopping cart.

Subtotal: $0.00
Weldona, CO

Same Day Shipping
UPS orders placed before 2:00pm MT
US Postal orders placed before 3:00pm MT

We will continue to ship orders until USPS or UPS actually picks up.

Fuel Bowl Kit

More Views

#6-002 - 94-97 F series Complete Fuel Bowl Reseal Kit

Be the first to review this product

$12.50

Availability: In stock

Complete Fuel Bowl Reseal Kit for the 1994.5 - 1997 Ford 7.3L Diesels

* Required Fields

$12.50

Complete Fuel Bowl Reseal Kit for the 1994.5 - 1997 Ford 7.3L Diesels
All of our O-rings are Made in the USA for the original OEM Fuel Bowl and drain valve!

This complete o-ring kit supplies you with all 10 of the necessary Viton o-rings for the 1994.5/1995 models and  11 of the necessary Viton o-rings for the 1996/1997 7.3L diesels:

 

  • O-rings for the 7.3 fuel drain valve stem; Black Brown or Blue
  • O-rings for the Water in Fuel sensor
  • O-ring for the Fuel Heater / Thermostat connector
  • All O-rings for the Fuel Pressure Regulator

Note on the Fluorosilicone Option: 

Fuel Drain Valve o-rings: A set of 2 High Quality Fluorosilicone MilSpec M25988/2 (FVMQ) O-rings for the Fuel in Water drain valve and 1 Viton O-ring for the valve stem. For the drain valves on both the 1994.5-1997 trucks and vans along with the 1999-2003 trucks and vans.

 


 

 

The 96-97 fuel bowls have a slightly different configuration on the Pressure Regulator and fuel bowl fittings from the 94-95 canisters but are extreamly similar. Please note that the instuction sheet is written using a 94.5-95 fuel bowl but has pictures and explanations for the 96-97 bowls. The kit contains all of the o-rings needed for either the 94.5-95 or the 96-97 fuel bowl assemblies.

Instruction Sheet: Download PDF file Here.  (Large 2MB Adobe Acrobat file)

You must have Adobe Acrobat reader installed on your computer to download this document.

Order of 1 is a set of 12 o-rings, only use the o-rings necessary for your model. We have included an extra o-ring for the regulator filter cap for the 96-97 models since it is very easy to cut this o-ring during the re-assembly process so this will allow you a 2nd try if it leaks.

 

viton Durometer Shore: Shore A: 75 Viton

SAE Specification:
SAE J200

 

Model Year 94-97 OBS 7.3L diesel F-series pickups.

Choices of Types of Drain Valve o-rings
  • Black Viton bi-monometer compound-Viton (A)
  • Blue MilSpec M25988/2 Fluorosilicone. (FVMQ)


Differences between the black Viton (A), or the Blue Fluorosilicone fuel drain o-rings sold on this page:

  • The black Viton o-rings are polymerized from two monomers, vinylidene fluoride and hexafluoropropylene (Viton type A). The low temp flexibility of Viton(A) is -2deg F but will continue to perform well in our type of service at a much lower temperature (-20 F).

  • The Blue Fluorosilicone elastomer is a Military Specification material that has a much wider temperature range than Viton (A) or Viton (B) and is widely used where fuel contains corrisive agents that are found in ULSD. Bio and veggie fuels. They will stay flexible in artic conditions down to -70º F and can withstand temperatures in excess of 400 F.
Select the type of compound from the drop down at the top of this page.

 

ParkerFrom Parker Hannifin :
"In the automotive market, fluorosilicones are the seal material of choice for handling gasoline, E85, diesel fuel, biodiesel and ULSD at extremely low temperatures."


Includes o-ring size identification comparison and location chart. Shipped with order.

Item #6-002
drain valve
Orders Over $99 with *Free Shipping on US orders ships via US Postal Mail including Hawaii, Alaska and PR. Weight restrictions apply to Hawaii, Alaska and PR
*Free Shipping on large and/or heavy orders ships via UPS and only applies to orders to addresses within the Continental US (excluding Alaska).
UPS shipments outside the Continental US will incur additional charges.