Product Description
| Head Oil Rail Drain Plug O-rings |
 |
There are 4 oil rail drain plugs - 2 on each head. |
When removing injectors for servicing or replacement, the oil rails should be drained prior to removing the injector. This will prevent the oil rail contents from draining into the cylinder and causing hydrolock and possible damage to the engine. The cylinder will still require evacuation of any coolant and/or oil before cranking the engine after servicing the injectors. The Allen hex headed plugs should be removed but using a socketed Allen wrench on a short extension. Insert the Allen wrench into the head and give the extension a few taps with a hammer to assure that the wrench is fully seated in the plug and to help break the plug threads loose from the head. |
|
Color: Black Drain Plug O-rings:  |
|
Order quantity of 1 for each package of 4 o-rings. |
You may also be interested in the following product(s)
Related Products
Check items to add to the cart or select all
Compare Products
You have no items to compare.
shopping cart
You have no items in your shopping cart.
Secure Payments
with Authorize.net
